AircraftBeginner
4.9(128 verified builders)
VT-Simple Trainer
55" (1400mm) wingspan high-wing self-leveling trainer built from Fliteboard Pro and laser-cut Aeroply. Ultra forgiving and stable for first-time builders and pilots.
Wingspan1400 mm (55 in)
Flying Weight500 g
Assembly Time45 mins
Pan-India Safe Delivery in heavy-duty reinforced corrugated cartons
100% Maiden Flight Guarantee: Free replacement laser sheets if broken on first toss
Step 1: Choose Your Completion Level
Kit Builder Configurator
All parts guaranteed 100% compatible
Included in this tier:
Complete Ready-To-Fly Starter Kit Bill of Materials7 Items Included
Total Price (excl. GST)
₹7,899+ GST
Everything in the Airframe + Power Combo
FlySky FS-i6X 6-Channel 2.4GHz AFHDS 2A Radio Transmitter
FlySky FS-iA6B 6CH Receiver with telemetry support
3S 11.1V 1500mAh 45C High-Discharge LiPo Battery Pack
Compact B3 Pro 2S/3S Automatic LiPo Balance Charger
Low-Temperature Hot Glue Gun + 10x Foam-Safe Glue Sticks
Field Maiden Flight Checklist & Center of Gravity (CG) Ruler
Engineering Specs
Specifications & Recommended Equipment
Factory tested airframe benchmarks, electrical power combos, and center-of-gravity parameters.
Airframe Specifications
- Wing Span
- 55in / 1400mm
- Length
- 31.5in / 800mm
- AUW (All Up Weight)
- 500gms
- Weight Without Battery
- 350gms
- CG Location
- 58mm from the nose (Location marked)
- Material
- Fliteboard Pro & Aeroply
Recommended Equipment
- Motor
- 1806-2300kv / CF2822-1200kv Brushless Motor
- ESC
- 20-30 amp
- Battery
- 1000- 1300 mAH 3s
- Servos
- (2) 9 gram servos
- Propeller
- 8x4.7 / 9 X 4.7
- Skill Level
- Beginner
Unbox Inspection
What's Inside the Box
Complete inventory included in every kit. Every sheet is precision laser-cut with micro-tabs.
What's Included in the Kit (14 Items)
Fliteboard Pro (3 Nos)
Pushrod Connectors (2)
EPP Foam Wheel Set(2pcs)
Aeroply Part sheet
Velcro
Heat shrink tube
Pushrods (2pcs) ~65cm ea.
Paper knife
Landing gear wire 17"
Pushrod Guide (2 small)
Bamboo Stick (2 small)
Wheel Collard (4pcs)
Latex Rubber Band(1pcs for landing gear)
Rubber bands for wing attachment (20pcs)
Precision Laser-Cut Airframe Sheets (6 Sheets)
Sheet #1: Fliteboard Pro Sheet 1 (Main Wing Panels)
Sheet #2: Fliteboard Pro Sheet 2 (Fuselage & Tail Feathers)
Sheet #3: Fliteboard Pro Sheet 3 (Doublers & Wing Spars)
Sheet #4: Laser Cut Aeroply Parts Sheet
Sheet #5: Landing Gear & Hardware Pack
Sheet #6: Recommended Electronics Components
VT-Simple Trainer CG Specs & Calculation Docs
Reference wingspan (1400 mm (55 in)), MAC formulas, and factory fingertip balance marks.
Pre-Flight Maiden Checklist
Run the 10-point field checklist before launching VT-Simple Trainer on its first voyage.